Molds & Tooling
5 görüntüleme
EVA surface gloss is poor
Sorun Belirtisi
EVA product surface gloss <60%, below the 80% requirement, with dull appearance
Neden Analizi
Rough mold surface Ra>0.4μm; high EVA crystallinity with surface microcrystals scattering light; improper cooling rate
Çözüm
1) Polish the mold to Ra<0.1μm mirror finish; 2) Increase mold temperature to delay crystallization and reduce scattering; 3) Add nucleating agent to control crystal size
Temel Çıkarım
Poor gloss is caused by rough mold and crystalline scattering; polishing the mold and controlling crystallization are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!