Extrusion & Post
13 visualizações
Glass Fibre extrusion rough surface
Fenómeno do problema
Glass Fibre extruded product surface roughness Ra>5μm, exceeding requirement
Análise das causas
Extrusion temperature too low <160°C, melt flow unstable; die inner wall rough or damaged; Glass Fibre melt elasticity, extrusion swell uneven
Solução
1) Raise extrusion temperature to 160-220°C; 2) polish die inner wall Ra<0.4μm; 3) reduce extrusion rate 10-15%; 4) add 0.3-0.5wt% external lubricant
Conclusão principal
Rough surface is caused by low-temperature extrusion and die defects; raising temperature and polishing die are core countermeasures
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!