Molds & Tooling
7 visualizações
Glass Fibre angle deviation
Fenómeno do problema
Glass Fibre product angle deviation >1°, exceeding ±0.5° tolerance
Análise das causas
Uneven shrinkage causes angle change; mold angle design did not consider Glass Fibre shrinkage compensation; product deforms during demolding
Solução
1) Mold angle pre-compensates Glass Fibre shrinkage rate; 2) extend cooling time to ensure setting before demolding; 3) uniform cooling to reduce shrinkage difference
Conclusão principal
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!