Molds & Tooling
8 visualizaciones
Glass Fibre angle deviation
Fenómeno del problema
Glass Fibre product angle deviation >1°, exceeding ±0.5° tolerance
Análisis de la causa
Uneven shrinkage causes angle change; mold angle design did not consider Glass Fibre shrinkage compensation; product deforms during demolding
Solución
1) Mold angle pre-compensates Glass Fibre shrinkage rate; 2) extend cooling time to ensure setting before demolding; 3) uniform cooling to reduce shrinkage difference
Conclusión clave
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!