Molds & Tooling
6 مشاهدة
Glass Fibre angle deviation
ظاهرة المشكلة
Glass Fibre product angle deviation >1°, exceeding ±0.5° tolerance
تحليل الأسباب
Uneven shrinkage causes angle change; mold angle design did not consider Glass Fibre shrinkage compensation; product deforms during demolding
الحل
1) Mold angle pre-compensates Glass Fibre shrinkage rate; 2) extend cooling time to ensure setting before demolding; 3) uniform cooling to reduce shrinkage difference
الخلاصة الأساسية
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!