Injection Molding
2 visualizações
PC/ABS '2079851475616104452 warpage
Fenómeno do problema
Large flat PC/ABS products warp and deform after demolding.
Análise das causas
The shrinkage difference between amorphous PC and semi-crystalline ABS, plus uneven mold temperature, causes warpage.
Solução
Increase mold temperature 60-80°C with uniform distribution; uniform wall thickness; optimize gates.
Conclusão principal
PC/ABS warpage is jointly caused by the shrinkage difference of the two components and uneven cooling.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!