Molds & Tooling
7 visualizações
POE flatness insufficient
Fenómeno do problema
POE flat product flatness >0.5mm/100mm, warpage
Análise das causas
POE shrinkage large and anisotropic; mold cooling uneven; residual stress release causes continuous warpage
Solução
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
Conclusão principal
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!