Molds & Tooling
6 مشاهدة
POE flatness insufficient
ظاهرة المشكلة
POE flat product flatness >0.5mm/100mm, warpage
تحليل الأسباب
POE shrinkage large and anisotropic; mold cooling uneven; residual stress release causes continuous warpage
الحل
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
الخلاصة الأساسية
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!