Molds & Tooling
8 visualizaciones
POE flatness insufficient
Fenómeno del problema
POE flat product flatness >0.5mm/100mm, warpage
Análisis de la causa
POE shrinkage large and anisotropic; mold cooling uneven; residual stress release causes continuous warpage
Solución
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
Conclusión clave
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!