Molds & Tooling
7 visualizações
Correlation between silver streaks on the surface of PETG products and gate position
Fenómeno do problema
Silver streaks are concentrated near the gate and spread toward the middle of the product.
Análise das causas
The shear heat at the gate is the highest and the water vaporizes most violently, and shear-induced degradation occurs in the gate area.
Solução
Appropriately reduce the injection speed in the gate area; fully dry; optimize the gate size.
Conclusão principal
PETG gate area silver streaks point to shear and moisture.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!