Molds & Tooling
6 مشاهدة
Correlation between silver streaks on the surface of PETG products and gate position
ظاهرة المشكلة
Silver streaks are concentrated near the gate and spread toward the middle of the product.
تحليل الأسباب
The shear heat at the gate is the highest and the water vaporizes most violently, and shear-induced degradation occurs in the gate area.
الحل
Appropriately reduce the injection speed in the gate area; fully dry; optimize the gate size.
الخلاصة الأساسية
PETG gate area silver streaks point to shear and moisture.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!