Molds & Tooling
5 görüntüleme
PU angle deviation
Sorun Belirtisi
PU product angle deviation >1°, exceeding ±0.5° tolerance
Neden Analizi
Uneven shrinkage causing angle change; mold angle design did not consider PU shrinkage compensation; product deformation during demolding
Çözüm
1) Mold angle pre-compensation for PU shrinkage; 2) Extend cooling time to ensure setting before demolding; 3) Uniform cooling to reduce shrinkage difference
Temel Çıkarım
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!