Molds & Tooling
8 visualizaciones
PU angle deviation
Fenómeno del problema
PU product angle deviation >1°, exceeding ±0.5° tolerance
Análisis de la causa
Uneven shrinkage causing angle change; mold angle design did not consider PU shrinkage compensation; product deformation during demolding
Solución
1) Mold angle pre-compensation for PU shrinkage; 2) Extend cooling time to ensure setting before demolding; 3) Uniform cooling to reduce shrinkage difference
Conclusión clave
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!