Extrusion & Post
5 görüntüleme
PETG extrusion cast film edge thickening
Sorun Belirtisi
Bead-like thickening appears at the edges of the cast film, with a large thickness difference from the middle.
Neden Analizi
After the melt leaves the die, the edge contraction effect (die swell) and surface tension cause thickening, and the cast draw ratio is insufficient.
Çözüm
Increase the cast draw ratio (air gap adjustment); optimize the die edge compensation design; appropriately lower the melt temperature.
Temel Çıkarım
PETG cast film edge thickening is a common phenomenon.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!