Extrusion & Post
8 visualizações
PETG extrusion cast film edge thickening
Fenómeno do problema
Bead-like thickening appears at the edges of the cast film, with a large thickness difference from the middle.
Análise das causas
After the melt leaves the die, the edge contraction effect (die swell) and surface tension cause thickening, and the cast draw ratio is insufficient.
Solução
Increase the cast draw ratio (air gap adjustment); optimize the die edge compensation design; appropriately lower the melt temperature.
Conclusão principal
PETG cast film edge thickening is a common phenomenon.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!