Extrusion & Post
3 Aufrufe
PETG extrusion cast film edge thickening
Problembeschreibung
Bead-like thickening appears at the edges of the cast film, with a large thickness difference from the middle.
Ursachenanalyse
After the melt leaves the die, the edge contraction effect (die swell) and surface tension cause thickening, and the cast draw ratio is insufficient.
Lösung
Increase the cast draw ratio (air gap adjustment); optimize the die edge compensation design; appropriately lower the melt temperature.
Wichtigste Erkenntnis
PETG cast film edge thickening is a common phenomenon.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!