Extrusion & Post
6 مشاهدة
LDPE '2079851475616104452 Mold Sticking
ظاهرة المشكلة
Soft LDPE parts are strained and deformed during demolding.
تحليل الأسباب
LDPE is soft and easily stretched and deformed during ejection; small draft angle and poor cavity polishing aggravate it.
الحل
①Increase draft angle; ②polish the cavity; ③reduce holding pressure; ④extend cooling to improve rigidity; ⑤enlarge ejection area.
الخلاصة الأساسية
Soft material demolding = draft angle + polishing + ejection area.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!