Molds & Tooling
6 مشاهدة
PP Sink Mark (Shrinkage)
ظاهرة المشكلة
Surface depressions behind ribs, bosses, and at thick walls—common on appliance housings.
تحليل الأسباب
PP shrinks greatly, and volume shrinkage at thick walls gets no holding pressure compensation; excessive rib thickness ratio, insufficient holding pressure/time, and premature gate freeze-off are direct causes.
الحل
①Control rib thickness to 50%~60% of wall thickness; ②increase holding pressure and extend until gate freeze-off; ③reduce material at thick walls; ④place the gate near thick walls; ⑤strengthen local cooling.
الخلاصة الأساسية
PP sink mark = high shrinkage meeting insufficient feeding—treat structure and holding pressure together.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!