Extrusion & Post
12 مشاهدة
EEA Vacuum Section Material Overflow
ظاهرة المشكلة
Material overflows at the vacuum vent section during EEA extrusion, vent hole blocked
تحليل الأسباب
EEA melt viscosity is low and overflows at the vacuum section; vacuum section temperature is high, viscosity even lower, aggravating overflow; improper vent hole design
الحل
1) Lower the vacuum section temperature by 5-10°C to increase viscosity; 2) Add a baffle above the vent hole to prevent overflow; 3) Increase screw speed to accelerate conveying and reduce residence
الخلاصة الأساسية
Overflow is caused by low melt viscosity; lowering temperature and adding a baffle are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!