Injection Molding
7 مشاهدة
EVOH Surface Orange Peel
ظاهرة المشكلة
EVOH product surfaces show orange-peel-like uneven texture, rough to the touch
تحليل الأسباب
Mold temperature too low <30°C, product surface rapidly cools and solidifies then the interior continues to shrink causing surface unevenness; injection speed too low
الحل
1) Increase mold temperature to 40-50°C to delay surface solidification; 2) Appropriately increase injection speed; 3) Increase holding pressure to reduce internal shrinkage
الخلاصة الأساسية
Orange peel is caused by rapid cooling and solidification; increasing mold temperature and holding pressure are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!