Injection Molding
2 visualizaciones
EVOH Surface Orange Peel
Fenómeno del problema
EVOH product surfaces show orange-peel-like uneven texture, rough to the touch
Análisis de la causa
Mold temperature too low <30°C, product surface rapidly cools and solidifies then the interior continues to shrink causing surface unevenness; injection speed too low
Solución
1) Increase mold temperature to 40-50°C to delay surface solidification; 2) Appropriately increase injection speed; 3) Increase holding pressure to reduce internal shrinkage
Conclusión clave
Orange peel is caused by rapid cooling and solidification; increasing mold temperature and holding pressure are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!