Injection Molding
7 مشاهدة
MP severe internal stress concentration
ظاهرة المشكلة
MP product internal stress >15MPa causing cracking during storage
تحليل الأسباب
injection speed too fast, orientation stress large; uneven cooling freezes thermal stress; improper gate position, flow orientation concentrated
الحل
1) reduce injection speed to reduce orientation; 2) uniform mold temperature to reduce thermal stress; 3) anneal at 80°C/4h to release stress; 4) optimize gate position
الخلاصة الأساسية
internal stress is caused by fast injection and uneven cooling; reducing speed, uniform cooling and annealing are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!