Injection Molding
2 visualizaciones
MP severe internal stress concentration
Fenómeno del problema
MP product internal stress >15MPa causing cracking during storage
Análisis de la causa
injection speed too fast, orientation stress large; uneven cooling freezes thermal stress; improper gate position, flow orientation concentrated
Solución
1) reduce injection speed to reduce orientation; 2) uniform mold temperature to reduce thermal stress; 3) anneal at 80°C/4h to release stress; 4) optimize gate position
Conclusión clave
internal stress is caused by fast injection and uneven cooling; reducing speed, uniform cooling and annealing are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!