Injection Molding
1 visualizações
MP severe internal stress concentration
Fenómeno do problema
MP product internal stress >15MPa causing cracking during storage
Análise das causas
injection speed too fast, orientation stress large; uneven cooling freezes thermal stress; improper gate position, flow orientation concentrated
Solução
1) reduce injection speed to reduce orientation; 2) uniform mold temperature to reduce thermal stress; 3) anneal at 80°C/4h to release stress; 4) optimize gate position
Conclusão principal
internal stress is caused by fast injection and uneven cooling; reducing speed, uniform cooling and annealing are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!