Injection Molding
10 Aufrufe
HDPE injection molded product melt temperature unevenness
Problembeschreibung
Some areas of the same-mold products have inconsistent gloss and shrinkage.
Ursachenanalyse
Uneven plasticization and large melt temperature difference; insufficient back pressure or poor screw mixing ability.
Lösung
①Increase back pressure; ②check the screw mixing section; ③stabilize the melt temperature curve; ④replace with a mixing-type screw if necessary.
Wichtigste Erkenntnis
Melt uniformity relies on back pressure and screw mixing.
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!