Injection Molding
13 مشاهدة
HDPE injection molded product melt temperature unevenness
ظاهرة المشكلة
Some areas of the same-mold products have inconsistent gloss and shrinkage.
تحليل الأسباب
Uneven plasticization and large melt temperature difference; insufficient back pressure or poor screw mixing ability.
الحل
①Increase back pressure; ②check the screw mixing section; ③stabilize the melt temperature curve; ④replace with a mixing-type screw if necessary.
الخلاصة الأساسية
Melt uniformity relies on back pressure and screw mixing.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!