Injection Molding
14 visualizações
HDPE injection molded product melt temperature unevenness
Fenómeno do problema
Some areas of the same-mold products have inconsistent gloss and shrinkage.
Análise das causas
Uneven plasticization and large melt temperature difference; insufficient back pressure or poor screw mixing ability.
Solução
①Increase back pressure; ②check the screw mixing section; ③stabilize the melt temperature curve; ④replace with a mixing-type screw if necessary.
Conclusão principal
Melt uniformity relies on back pressure and screw mixing.
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!