Injection Molding
15 visualizaciones
HDPE injection molded product melt temperature unevenness
Fenómeno del problema
Some areas of the same-mold products have inconsistent gloss and shrinkage.
Análisis de la causa
Uneven plasticization and large melt temperature difference; insufficient back pressure or poor screw mixing ability.
Solución
①Increase back pressure; ②check the screw mixing section; ③stabilize the melt temperature curve; ④replace with a mixing-type screw if necessary.
Conclusión clave
Melt uniformity relies on back pressure and screw mixing.
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!