Injection Molding
12 görüntüleme
HDPE injection molded product melt temperature unevenness
Sorun Belirtisi
Some areas of the same-mold products have inconsistent gloss and shrinkage.
Neden Analizi
Uneven plasticization and large melt temperature difference; insufficient back pressure or poor screw mixing ability.
Çözüm
①Increase back pressure; ②check the screw mixing section; ③stabilize the melt temperature curve; ④replace with a mixing-type screw if necessary.
Temel Çıkarım
Melt uniformity relies on back pressure and screw mixing.
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!