Molds & Tooling
3 Aufrufe
Poor surface gloss of EMA
Problembeschreibung
EMA product surface gloss <60%, below the 80% requirement, with dull appearance
Ursachenanalyse
Mold surface roughness Ra>0.4μm; high EMA crystallinity with surface microcrystals scattering light; improper cooling rate
Lösung
1) Polish mold to Ra<0.1μm mirror finish; 2) Increase mold temperature to delay crystallization and reduce scattering; 3) Add nucleating agent to control crystal size
Wichtigste Erkenntnis
Poor gloss is caused by mold roughness and crystallization scattering; mold polishing and crystallization control are key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!