Molds & Tooling
5 görüntüleme
Poor surface gloss of EMA
Sorun Belirtisi
EMA product surface gloss <60%, below the 80% requirement, with dull appearance
Neden Analizi
Mold surface roughness Ra>0.4μm; high EMA crystallinity with surface microcrystals scattering light; improper cooling rate
Çözüm
1) Polish mold to Ra<0.1μm mirror finish; 2) Increase mold temperature to delay crystallization and reduce scattering; 3) Add nucleating agent to control crystal size
Temel Çıkarım
Poor gloss is caused by mold roughness and crystallization scattering; mold polishing and crystallization control are key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!