Molds & Tooling
8 visualizaciones
Poor surface gloss of EMA
Fenómeno del problema
EMA product surface gloss <60%, below the 80% requirement, with dull appearance
Análisis de la causa
Mold surface roughness Ra>0.4μm; high EMA crystallinity with surface microcrystals scattering light; improper cooling rate
Solución
1) Polish mold to Ra<0.1μm mirror finish; 2) Increase mold temperature to delay crystallization and reduce scattering; 3) Add nucleating agent to control crystal size
Conclusión clave
Poor gloss is caused by mold roughness and crystallization scattering; mold polishing and crystallization control are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!