Molds & Tooling
7 visualizações
Poor surface gloss of EMA
Fenómeno do problema
EMA product surface gloss <60%, below the 80% requirement, with dull appearance
Análise das causas
Mold surface roughness Ra>0.4μm; high EMA crystallinity with surface microcrystals scattering light; improper cooling rate
Solução
1) Polish mold to Ra<0.1μm mirror finish; 2) Increase mold temperature to delay crystallization and reduce scattering; 3) Add nucleating agent to control crystal size
Conclusão principal
Poor gloss is caused by mold roughness and crystallization scattering; mold polishing and crystallization control are key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!