Molds & Tooling
3 Aufrufe
EVA flatness is insufficient
Problembeschreibung
EVA flat product flatness >0.5mm/100mm warpage
Ursachenanalyse
EVA shrinkage rate is large and differs in all directions; uneven mold cooling; residual stress release causing continuous warpage
Lösung
1) Uniform mold temperature to reduce temperature differences; 2) Increase holding pressure to reduce shrinkage differences; 3) Annealing to release residual stress
Wichtigste Erkenntnis
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!