Molds & Tooling
8 visualizaciones
EVA flatness is insufficient
Fenómeno del problema
EVA flat product flatness >0.5mm/100mm warpage
Análisis de la causa
EVA shrinkage rate is large and differs in all directions; uneven mold cooling; residual stress release causing continuous warpage
Solución
1) Uniform mold temperature to reduce temperature differences; 2) Increase holding pressure to reduce shrinkage differences; 3) Annealing to release residual stress
Conclusión clave
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!