Molds & Tooling
6 مشاهدة
EVA flatness is insufficient
ظاهرة المشكلة
EVA flat product flatness >0.5mm/100mm warpage
تحليل الأسباب
EVA shrinkage rate is large and differs in all directions; uneven mold cooling; residual stress release causing continuous warpage
الحل
1) Uniform mold temperature to reduce temperature differences; 2) Increase holding pressure to reduce shrinkage differences; 3) Annealing to release residual stress
الخلاصة الأساسية
Insufficient flatness is caused by shrinkage differences and stress; uniform cooling and annealing are key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!