Molds & Tooling
3 Aufrufe
Insufficient PVA flatness
Problembeschreibung
PVA flat product flatness >0.5mm/100mm, warpage
Ursachenanalyse
PVA shrinkage large and different in each direction; uneven mold cooling; residual stress release causing continuous warpage
Lösung
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
Wichtigste Erkenntnis
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are the key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!