Molds & Tooling
5 görüntüleme
Insufficient PVA flatness
Sorun Belirtisi
PVA flat product flatness >0.5mm/100mm, warpage
Neden Analizi
PVA shrinkage large and different in each direction; uneven mold cooling; residual stress release causing continuous warpage
Çözüm
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
Temel Çıkarım
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!