Molds & Tooling
6 مشاهدة
Insufficient PVA flatness
ظاهرة المشكلة
PVA flat product flatness >0.5mm/100mm, warpage
تحليل الأسباب
PVA shrinkage large and different in each direction; uneven mold cooling; residual stress release causing continuous warpage
الحل
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
الخلاصة الأساسية
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!