Molds & Tooling
7 visualizações
Insufficient PVA flatness
Fenómeno do problema
PVA flat product flatness >0.5mm/100mm, warpage
Análise das causas
PVA shrinkage large and different in each direction; uneven mold cooling; residual stress release causing continuous warpage
Solução
1) Uniform mold temperature to reduce temperature difference; 2) Increase holding pressure to reduce shrinkage difference; 3) Annealing to release residual stress
Conclusão principal
Insufficient flatness is caused by shrinkage difference and stress; uniform cooling and annealing are the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!