Molds & Tooling
3 Aufrufe
CMC Angle Deviation
Problembeschreibung
Angle deviation of CMC products >1° exceeds the ±0.5° tolerance
Ursachenanalyse
Uneven shrinkage causes angle changes; mold angle design does not consider CMC shrinkage compensation; product deforms during demolding
Lösung
1)Pre-compensate mold angle for CMC shrinkage; 2)Extend cooling time to ensure setting before demolding; 3)Uniform cooling to reduce shrinkage differences
Wichtigste Erkenntnis
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is the key
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!