Molds & Tooling
6 مشاهدة
CMC Angle Deviation
ظاهرة المشكلة
Angle deviation of CMC products >1° exceeds the ±0.5° tolerance
تحليل الأسباب
Uneven shrinkage causes angle changes; mold angle design does not consider CMC shrinkage compensation; product deforms during demolding
الحل
1)Pre-compensate mold angle for CMC shrinkage; 2)Extend cooling time to ensure setting before demolding; 3)Uniform cooling to reduce shrinkage differences
الخلاصة الأساسية
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is the key
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!