Molds & Tooling
7 visualizações
CMC Angle Deviation
Fenómeno do problema
Angle deviation of CMC products >1° exceeds the ±0.5° tolerance
Análise das causas
Uneven shrinkage causes angle changes; mold angle design does not consider CMC shrinkage compensation; product deforms during demolding
Solução
1)Pre-compensate mold angle for CMC shrinkage; 2)Extend cooling time to ensure setting before demolding; 3)Uniform cooling to reduce shrinkage differences
Conclusão principal
Angle deviation is caused by shrinkage and insufficient design compensation; pre-compensation is the key
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!