Material Analysis
11 visualizaciones
Fiber content inspection inaccurate
Fenómeno del problema
The fiber content measured by the ashing method fluctuates from the formulation value by >3%
Análisis de la causa
PP does not pyrolyze completely during ashing, leaving carbides causing high mass; the glass fiber itself loses mass during high-temperature ashing (>600°C); sampling representativeness is insufficient
Solución
Standardize ashing conditions (constant temperature at 550°C for 2 hours); use TGA (thermogravimetric analysis) to accurately measure each component; take samples at multiple points and mix to improve representativeness
Conclusión clave
Fiber content is the core indicator of LGFPP quality inspection, and the inspection method needs to be standardized
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!