Molds & Tooling
5 görüntüleme
CEF internal shrinkage cavity
Sorun Belirtisi
Shrinkage cavities with a diameter of 0.5-2mm appear in the center of the CEF thick-walled product
Neden Analizi
The thick-walled area shrinks internally after cooling but the surface has solidified and cannot be fed; the holding pressure time is insufficient and the gate freezes too early
Çözüm
1) Extend the holding pressure time until the gate is completely frozen; 2) Increase the gate size to delay freezing; 3) Product design to reduce wall thickness differences
Temel Çıkarım
Shrinkage cavities are caused by thick wall shrinkage and insufficient holding pressure; extending the holding pressure is the key
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!