Injection Molding
4 مشاهدة
PETG '2079851475616104452 low production efficiency, long cycle
ظاهرة المشكلة
The molding cycle is too long, cooling time accounts for a large proportion, and capacity is insufficient.
تحليل الأسباب
Cooling time too long, melt temperature high requiring longer cooling, mold cooling efficiency insufficient.
الحل
Lower the melt temperature to 220-240°C; optimize the mold cooling water channels to improve efficiency; use a low-temperature mold temperature controller.
الخلاصة الأساسية
PETG molding cycle optimization mainly starts from cooling efficiency.
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!