Molding Process
15 Aufrufe
Product bubbles during imidization
Problembeschreibung
A large number of bubbles are generated during thermal imidization, causing defects in PI films or products
Ursachenanalyse
Water produced during imidization (condensation byproduct) has no time to escape; heating rate too fast, water vapor bursts
Lösung
Use step heating (such as holding at 100/200/300°C for 1h each); control the film thickness not to be too thick; heat slowly in an inert atmosphere
Wichtigste Erkenntnis
Controlling water escape during imidization is the key to PI preparation
War das hilfreich?
0 Personen fanden dies hilfreich
Vielen Dank für Ihr Feedback!