Molding Process
18 مشاهدة
Product bubbles during imidization
ظاهرة المشكلة
A large number of bubbles are generated during thermal imidization, causing defects in PI films or products
تحليل الأسباب
Water produced during imidization (condensation byproduct) has no time to escape; heating rate too fast, water vapor bursts
الحل
Use step heating (such as holding at 100/200/300°C for 1h each); control the film thickness not to be too thick; heat slowly in an inert atmosphere
الخلاصة الأساسية
Controlling water escape during imidization is the key to PI preparation
هل كان هذا مفيدًا؟
0 شخص وجدوا هذا مفيدًا
شكرًا لك على ملاحظاتك!