Molding Process
17 görüntüleme
Product bubbles during imidization
Sorun Belirtisi
A large number of bubbles are generated during thermal imidization, causing defects in PI films or products
Neden Analizi
Water produced during imidization (condensation byproduct) has no time to escape; heating rate too fast, water vapor bursts
Çözüm
Use step heating (such as holding at 100/200/300°C for 1h each); control the film thickness not to be too thick; heat slowly in an inert atmosphere
Temel Çıkarım
Controlling water escape during imidization is the key to PI preparation
Bu faydalı oldu mu?
0 kişi bunu faydalı buldu
Geri bildiriminiz için teşekkürler!