Molding Process
19 visualizações
Product bubbles during imidization
Fenómeno do problema
A large number of bubbles are generated during thermal imidization, causing defects in PI films or products
Análise das causas
Water produced during imidization (condensation byproduct) has no time to escape; heating rate too fast, water vapor bursts
Solução
Use step heating (such as holding at 100/200/300°C for 1h each); control the film thickness not to be too thick; heat slowly in an inert atmosphere
Conclusão principal
Controlling water escape during imidization is the key to PI preparation
Isto foi útil?
0 pessoas acharam isto útil
Obrigado pelo seu comentário!